[1]王伟才孙俊,王银燕,曾春荣.相继增压柴油机线性模型动态实时仿真[J].应用科技,2005,32(06):53.
点击复制

相继增压柴油机线性模型动态实时仿真(/HTML)
分享到:

《应用科技》[ISSN:1009-671X/CN:23-1191/U]

卷:
第32卷
期数:
2005年06期
页码:
53
栏目:
动力与能源工程
出版日期:
2005-06-05

文章信息/Info

Title:
Dynamic real time simulation of a linearization model of sequentially turbocharged diesel engine
作者:
王伟才1孙俊2王银燕1曾春荣1
1.哈尔滨工程大学动力与核能工程学院,黑龙江哈尔滨150001;
2,陕西柴油机厂,陕西西安713105
关键词:
柴油机相继增压Simulink仿真动态仿真
Keywords:
diesel engine sequential turbocharging Simulink simulation dynamic simulation
文献标志码:
A

相似文献/References:

[1]孙俊.柴油机活塞温度场有限元分析的简单方法[J].应用科技,2009,36(06):69.[doi:doi:10.3969/j.issn.1009-671X.2009.06.017]
 SUN Jun.A simple method of finite element analysis for diesel piston temperature field[J].yykj,2009,36(06):69.[doi:doi:10.3969/j.issn.1009-671X.2009.06.017]
[2]杨传雷,刘春罡,罗巩固,等.柴油机相继增压系统信号模拟器的开发[J].应用科技,2010,37(08):45.[doi:10.3969/j.issn.1009-671X.2010.08.011]
 YANG Chuan-lei,LIU Chun-gang,LUO Gong-gu,et al.Development of signal simulation generator for the sequentially turbocharged system of a diesel[J].yykj,2010,37(06):45.[doi:10.3969/j.issn.1009-671X.2010.08.011]
[3]张子英,张光炯,张保成,等.柴油机主副连杆有限元分析方法[J].应用科技,2010,37(11):5.[doi:10.3969/j.issn.1009-671X.2010.11.002]
 ZHANG Zi-ying,ZHANG Guang-jiong,ZHANG Bao-cheng,et al.Finite element analytic method of chiefvice connecting rods[J].yykj,2010,37(06):5.[doi:10.3969/j.issn.1009-671X.2010.11.002]
[4]袁帅,王贺春,林娉羽,等.两种米勒循环方案对发动机性能影响对比[J].应用科技,2017,44(05):17.[doi:10.11991/yykj.201612020]
 YUAN Shuai,WANG Hechun,LIN Pinyu,et al.Contrast on the effects of two miller cycle schemes on engine performance[J].yykj,2017,44(06):17.[doi:10.11991/yykj.201612020]
[5]袁帅,王贺春,李禹函,等.EGR技术对柴油机性能的影响[J].应用科技,2018,45(03):81.[doi:10.11991/yykj.201703001]
 YUAN Shuai,WANG Hechun,LI Yuhan,et al.Influence of EGR technology on the performances of diesel engine[J].yykj,2018,45(06):81.[doi:10.11991/yykj.201703001]
[6]牛晓晓,王银燕,王正祥,等.柴油机性能及排放预测高效试验设计应用研究[J].应用科技,2018,45(05):95.[doi:10.11991/yykj.201705002]
 NIU Xiaoxiao,WANG Yinyan,WANG Zhengxiang,et al.Application of high-efficiency experimental design method for predicting the performance and emission of diesel engine[J].yykj,2018,45(06):95.[doi:10.11991/yykj.201705002]
[7]李宗营,杨传雷,胡松,等.某型脉冲增压柴油机排气管结构优化设计[J].应用科技,2018,45(04):32.[doi:10.11991/yykj.201704011]
 LI Zongying,YANG Chuanlei,HU Song,et al.Optimization design of exhaust manifold structure for a pulse turbocharged diesel engine[J].yykj,2018,45(06):32.[doi:10.11991/yykj.201704011]
[8]袁帅,王贺春,李禹函,等.进气条件对EGR柴油机工作性能的影响[J].应用科技,2018,45(04):39.[doi:10.11991/yykj.201703002]
 YUAN Shuai,WANG Hechun,LI Yuhan,et al.The influence of inlet conditions on the EGR diesel engine performance[J].yykj,2018,45(06):39.[doi:10.11991/yykj.201703002]
[9]黄建余,崔欣洁,杨传雷,等.柴油机相继增压防喘振控制器的开发[J].应用科技,2011,38(06):1.[doi:10.3969/j.issn.1009-671X.2011.06.001]
 HUANG Jianyu,CUI Xinjie,YANG Changlei,et al.Development of an anti- surge controller for diesel engine sequential turbocharging system[J].yykj,2011,38(06):1.[doi:10.3969/j.issn.1009-671X.2011.06.001]
[10]王伟才,王银燕,王贺春.相继增压柴油机进排气系统建模与增压器切换点计算分析[J].应用科技,2005,32(05):46.
[11]左大军,王银燕,杨传雷,等.柴油机相继增压控制系统硬件可靠性研究[J].应用科技,2014,41(04):65.
 ZUO Dajun,WANG Yinyan,YANG Chuanlei,et al.Investigation of hardware reliability of sequential turbocharging control system with diesel engine[J].yykj,2014,41(06):65.
[12]胡松,王银燕,孙永瑞,等.基于GT-power和Simulink的相继增压切出过程仿真研究[J].应用科技,2015,42(05):55.[doi:10.11991/yykj.201410007]
 HU Song,WANG Yinyan,SUN Yongrui,et al.Simulation of sequential turbochargingcutting out process based on GT-power and Simulink[J].yykj,2015,42(06):55.[doi:10.11991/yykj.201410007]
[13]杨传雷,马传杰,王银燕,等.相继增压柴油机调速控制算法研究[J].应用科技,2017,44(05):30.[doi:10.11991/yykj.201607019]
 YANG Chuanlei,MA Chuanjie,WANG Yinyan,et al.Research on the speed regulation control algorithms for sequential turbocharging diesel engine[J].yykj,2017,44(06):30.[doi:10.11991/yykj.201607019]
[14]李宗营,马传杰,杨传雷,等.RBF神经网络对STC柴油机调速系统性能改善研究[J].应用科技,2018,45(05):102.[doi:10.11991/yykj.201709017]
 LI Zongying,MA Chuanjie,YANG Chuanlei,et al.Research on the performance improvement of STC diesel engine speed control system by the RBF neural network[J].yykj,2018,45(06):102.[doi:10.11991/yykj.201709017]

更新日期/Last Update: 2013-07-10