[1]郑静,阎昌琪,王建军.基于复合—遗传算法斜齿轮减速器优化设计[J].应用科技,2010,37(10):21-25.[doi:10.3969/j.issn.1009-671X.2010.10.006]
 ZHENG Jing,YAN Chang-qi,WANG Jian-jun.Optimal design for helicalspur gear reducer based on complexgenetic algorithm[J].Applied science and technology,2010,37(10):21-25.[doi:10.3969/j.issn.1009-671X.2010.10.006]
点击复制

基于复合—遗传算法斜齿轮减速器优化设计(/HTML)
分享到:

《应用科技》[ISSN:1009-671X/CN:23-1191/U]

卷:
第37卷
期数:
2010年10期
页码:
21-25
栏目:
机电工程
出版日期:
2010-10-05

文章信息/Info

Title:
Optimal design for helicalspur gear reducer based on complexgenetic algorithm
文章编号:
1009-671X (2010) 10-0021-05
作者:
郑静阎昌琪王建军
(哈尔滨工程大学 核科学与技术学院,黑龙江 哈尔滨 150001)
Author(s):
ZHENG JingYAN Chang-qi WANG Jian-jun
(College of Nuclear Science and Technology, Harbin Engineering University, Harbin 150001, China)
关键词:
斜齿轮减速器优化设计复合形—遗传算法齿轮中心距
Keywords:
helicalspur gear reducer design optimization complexgenetic algorithm gear centerdistance
分类号:
TL353
DOI:
10.3969/j.issn.1009-671X.2010.10.006
文献标志码:
A
摘要:
针对标准复合形算法在设计变量较多时容易陷入局部最优的缺点,提出了复合形—遗传算法.建立了两级斜齿圆柱齿轮减速器的结构参数优化模型,并开发了相应的计算程序.以齿轮中心距之和为优化目标,在所确定的约束条件下,采用复合形—遗传算法对两级斜齿圆柱齿轮减速器进行结构参数优化设计.结果表明,减速器原方案并不是最优方案,尚有较大的优化空间,同时优化结果也证明该优化设计方法的可行性.
Abstract:
The complexgenetic algorithm was developed based on the standard complex algorithm which can bring about the localized optimization in the event of too many design parameters. The models were founded for the purpose of the structure parameters calculation of the twograde helicalspur gear reducer. The corresponding codes were also developed by the authors. The design optimization of the twograde helicalspur gear reducer, aiming at minimization of the sum of the gear centerdistance, was carried out with the selfdeveloped complexgenetic algorithm. The results show that the reference gear reducer design is far from the best scheme. In addition, the results also verify the feasibility of the complexgenetic algorithm.

参考文献/References:

[1]李元科.工程最优化设计[M].北京:清华大学出版社,2006,5-8.
[2] 曾宏,陈春瑞.复合形优化算法改进及其应用概述[J].福建化工,2005,4:52-55.
[3] 濮良贵,纪名刚.机械设计\M].北京:高等教育出版社,2004:200-221.
[4] 李玉平.斜齿轮减速器的优化设计[J].机械工程师,2002,40(2):40-41.
[5] 吴婷,张礼兵,黄磊.基于遗传算法的齿轮减速器优化设计[J].煤矿机械,2009,30(12):9-11.
[6] ALIM F, lVANOV K. New genetic algorithms (GA) to optimize PWR reactors[J]. Annals of Nuclear Energy,2008,1(3):93-112.
[7] MARSEGUERRA M, ZIO E, PODOFILLINI L. A multiobjective genetic algorithm approach to the optimization of the technical specifications of a nuclear safety system[J]. Reliability Engineering and System Safety,2004,84:87-99.
[8] 贺士晶,阎昌琪,王建军,王盟.复合形—遗传算法在核动力设备优化设计中的应用研究[J].核动力工程,2010,31(2):122-125.

相似文献/References:

[1]杨奇,王福伟,何蕾,等.摆线针轮行星减速器最佳短幅系数的确定及优化[J].应用科技,2010,37(05):1.[doi:10.3969/j.issn.1009-671X.2010.05.001]
 YANG Qi,WANG Fu-wei,HE Lei,et al.Optimal value and optimal design of short width coefficient of cycloid pin gear planetary reducer[J].Applied science and technology,2010,37(10):1.[doi:10.3969/j.issn.1009-671X.2010.05.001]
[2]徐君臣,银建中.纤维缠绕复合材料气瓶研究进展[J].应用科技,2012,39(04):64.[doi:10.3969/j.issn.1009- 671X.2012.04.014]
 XU Junchen,YIN Jianzhong.Progress in filament- wound composite gas cylinders[J].Applied science and technology,2012,39(10):64.[doi:10.3969/j.issn.1009- 671X.2012.04.014]
[3]朱高鹏,孙朝阳,李攀攀.方形矿用隔爆箱箱体螺栓组分布结构优化[J].应用科技,2014,41(06):67.[doi:10.3969/j.issn.1009671X.201403005]
 ZHU Gaopeng,SUN Zhaoyang,LI Panpan.Distribution structure optimization of the bolts of a square flameproof box[J].Applied science and technology,2014,41(10):67.[doi:10.3969/j.issn.1009671X.201403005]
[4]崔传涛,庄兆意,蒋叶辉,等.加热器实际换热性能的回热抽汽参数优化[J].应用科技,2017,44(06):79.[doi:10.11991/yykj.201709005]
 CUI Chuantao,ZHUANG Zhaoyi,JIANG Yehui,et al.Optimization design of regenerative extraction steam parameter based on heater actual performance[J].Applied science and technology,2017,44(10):79.[doi:10.11991/yykj.201709005]
[5]赵立财.长大隧道陡坡斜井设计优化对施工进度影响研究[J].应用科技,2018,45(04):124.[doi:10.11991/yykj.201702005]
 ZHAO Licai.Study on the construction progress affected by the long tunnel steep slope inclined shaft design optimization[J].Applied science and technology,2018,45(10):124.[doi:10.11991/yykj.201702005]
[6]吴凌慧,徐冬.一种耐高温、耐恶劣环境大压力传感器的设计[J].应用科技,2018,45(04):142.[doi:10.11991/yykj.201709015]
 WU Linghui,XU Dong.Design of a high pressure sensor resisting high temperature and harsh environment[J].Applied science and technology,2018,45(10):142.[doi:10.11991/yykj.201709015]
[7]黎春梅,李毅,刘立志,等.不同优化算法在稳压器重量优化中的比较[J].应用科技,2020,47(2):98.[doi:10.11991/yykj.201905020]
 LI Chunmei,LI Yi,LIU Lizhi,et al.Comparison of different optimization algorithms in weight optimization of a pressurizer[J].Applied science and technology,2020,47(10):98.[doi:10.11991/yykj.201905020]

备注/Memo

备注/Memo:
作者简介:郑静(1985-), 女, 硕士研究生,主要研究方向:核动力装置优化设计,E-mail:zhengjing2005@163.com.
更新日期/Last Update: 2010-10-29