[1]张希兴,李树春,王海泉,等.基于Anycasting铸造模拟技术的DA5排气歧管产品研制[J].应用科技,2013,40(01):8-13.[doi:10.3969/j.issn.1009-671X.201207002]
 ZHANG Xixing,LI Shuchun,WANG Haiquan,et al.The research on new product of exhaust manifold DA5 based on the Anycasting technology[J].Applied science and technology,2013,40(01):8-13.[doi:10.3969/j.issn.1009-671X.201207002]
点击复制

基于Anycasting铸造模拟技术的DA5排气歧管产品研制(/HTML)
分享到:

《应用科技》[ISSN:1009-671X/CN:23-1191/U]

卷:
第40卷
期数:
2013年01期
页码:
8-13
栏目:
机电工程
出版日期:
2013-02-05

文章信息/Info

Title:
The research on new product of exhaust manifold DA5 based on the Anycasting technology
文章编号:
1009-671X(2013)01-0008-06
作者:
张希兴 李树春 王海泉 王旭阳 王连川 冉丽娜 王杰
1. 哈尔滨东安汽车动力股份有限公司 铸造公司,黑龙江 哈尔滨 150066 2. 哈尔滨理工大学 材料科学与工程学院,黑龙江 哈尔滨 150040
Author(s):
ZHANG Xixing LI Shuchun WANG Haiquan WANG Xuyang WANG Lianchuan RAN Lina WANG Jie
1. Casting and Forging Plant, Harbin DongAn Auto Engine Co., Ltd., Harbin 150066, China 2. College of Materials Science and Engineering, Harbin University of Science and Technology, Harbin 150040, China
关键词:
充型凝固数值模拟铸造工艺Anycasting排气歧管
Keywords:
mold filling solidification numerical simulation casting technology Anycasting exhaust manifold
分类号:
TG250
DOI:
10.3969/j.issn.1009-671X.201207002
文献标志码:
A
摘要:
对铸件充型凝固过程数值模拟是提高铸件质量和铸造生产经济效益的重要途径之一. 在DA5排气歧管新品研制开发基础上,以模拟仿真软件Anycasting为工具,在DA5排气歧管模具设计初期,对不同浇注系统进行了铸件充型过程三维数值模拟,为浇注系统设计方案选择提供依据. 同时通过高级缺陷分析,对缩孔缺陷进行了预测,为DA5排气歧管工艺方案改进提供了方向,缩短了DA5排气歧管新品研制周期.
Abstract:
Numerical simulation of cast filling and solidification process is one of the most important ways to improve the quality of castings and increase economic benefit of foundry production. A novel product of DA5 exhaust manifold is researched and developed by using the simulation software Anycasting. In the initial period of design for the mould of DA5 exhaust manifold, a three-dimensional numerical simulation of mould filling process for different casting systems was done, which provided a basis for selection of the design options of pouring system. At the same time, the advanced analysis of defect and prediction of shrinkage defect provide a direction for improvement of DA5 exhaust manifold process, and reduce the cycle of new product development.

参考文献/References:

[1] 白月龙. 低压铸造充型过程数值模拟研究[D]. 太原:华北工业学院, 2002: 3-8.
[2] 张光跃,熊守美. 铸件充型过程数值模拟的实验验证及工程应用[J]. 铸造, 2000(10): 775-779.
[3] THOMAS B G, BECKERMANN C. Modeling of casting, welding and advangced solidification processes VIIIV[C]// Proceedings of International Conference. San Diego, USA, 1998: 17-132.
[4] 邱宗文.铸件凝固过程温度场三维数值迷你软件开发[D]. 南京: 东南大学, 1996: 12-16.
[6] 李德群, 李阳. 材料成形过程模拟技术及其应用[J]. 中国机械工程,2006(10):2005-2009.
[6] 黄宗辉. 基于AnyCasting的M3500蠕铁气缸盖铸造工艺优化[D]. 上海: 上海交通大学, 2009: 1-5.
[7] FLEMINGS M. Advanced casting technologies in Japan and Europe[EB/OL]. [2012-03-06]. http://itri.loyola,edu/casting/toc.htm, 1997-03/1998-05-28.8-11.
[8] 孙逊, 安阁英. 铸件充型凝固过程数值模拟发展现状[J]. 铸造, 2002(2): 84-88.
[9] 巫瑞智, 吴荷生, 吴玉彬, 等. 用喂线法进行球化脱硫处理的工业化实验数值传热学[J]. 铸造技术, 2003(1): 36-38.
[10] 中国机械工程学会铸造分会. 铸造手册[M]. 北京:机械工业出版社, 2004: 80-100.
[11] 宋广. 离心铸造装置设计及充型凝固过程实验研究与数值模拟[D]. 哈尔滨: 哈尔滨工业大学, 2008: 44-55.
[12] 李海丹. 柴油机铸件残余应力分析及退火工艺改进[D]. 上海: 上海交通大学, 2009: 13-16.

更新日期/Last Update: 2013-03-21