[1]陆鹏,赵亚楠,张艳秋,等.镍钛形状记忆合金管滚珠热旋压成形数值模拟[J].应用科技,2013,40(04):73-76.[doi:10.3969/j.issn.1009-671X.2012.201302003]
 LU Peng,ZHAO Yanan,ZHANG Yanqiu,et al.Numerical simulation of hot ball spinning of NiTi shape memory alloy tube[J].yykj,2013,40(04):73-76.[doi:10.3969/j.issn.1009-671X.2012.201302003]
点击复制

镍钛形状记忆合金管滚珠热旋压成形数值模拟(/HTML)
分享到:

《应用科技》[ISSN:1009-671X/CN:23-1191/U]

卷:
第40卷
期数:
2013年04期
页码:
73-76
栏目:
材料与化学
出版日期:
2013-10-05

文章信息/Info

Title:
Numerical simulation of hot ball spinning of NiTi shape memory alloy tube
文章编号:
1009- 671X(2013)04- 0073- 04
作者:
陆鹏1赵亚楠2张艳秋2江树勇2李春峰3
1. 哈尔滨飞机工业集团 工程技术部, 黑龙江 哈尔滨150060 2. 哈尔滨工程大学 工程训练中心, 黑龙江 哈尔滨150001 3. 哈尔滨工业大学 材料科学与工程学院, 黑龙江 哈尔滨150001
Author(s):
LU Peng1 ZHAO Yanan2 ZHANG Yanqiu2 JIANG Shuyong2 LI Chunfeng3
1. Engineering Technology Department, Harbin Aircraft Industry Group Co., Ltd., Harbin 150060, China
2. Industrial Training Center, Harbin Engineering University, Harbin 150001, China
3. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
关键词:
镍钛合金形状记忆合金有限元法数值模拟滚珠旋压
Keywords:
NiTi alloyshape memory alloyfinite element methodnumerical simulationball spinning
分类号:
TG306
DOI:
10.3969/j.issn.1009-671X.2012.201302003
文献标志码:
A
摘要:
为了获得高性能、高质量的镍钛形状记忆合金薄壁管,尝试采用滚珠热旋压方法进行镍钛形状记忆合金管的成形. 通过采用刚粘塑性有限元法对镍钛形状记忆合金管进行滚珠热旋压成形模拟,获得了镍钛形状记忆合金管坯在不同初始温度下的温度场、应力场和应变场,并进行了旋压载荷的预测. 模拟结果表明,旋压件主变形区的温升可达100 ℃以上,故不宜选择太高的旋压初始温度;旋压成形时主变形区处于三向压应力状态,这将有利于提高材料的塑性,从而实现更大程度的塑性变形;主变形区的等效应力和等效应变数值均由外壁到内壁逐渐减小,说明旋压成形时管坯的外壁比内壁更容易满足塑性屈服准则;随着旋压温度的升高,各方向的旋压载荷均呈下降趋势,轴向载荷远远小于径向载荷和切向载荷.
Abstract:
Hot ball spinning was used to manufacture nickel-titanium shape memory alloy(NiTi SMA) tube with high performance and high quality. The hot ball spinning of the NiTi SMA tube was simulated by means of rigid-viscoplastic finite element method (FEM), and consequently the temperature field, the stress field, the strain field and the spinning load prediction of NiTi SMA tube under ball spinning at the different initial temperatures were obtained. The simulation results show that the temperature rise is over 100℃ in the principal deformation zone of the spun part, and too high initial temperature should not be selected during spinning. In the process of spinning, the principal deformation zone is in a three-dimensional compressive stress state, which contributes to enhancing the plasticity of the metal material and thus realizes greater plastic deformation degree. Both the equivalent stress and the equivalent strain in the principal deformation zone decrease gradually from the outer wall to the inner wall, which indicates that the outer wall of the NiTi SMA tube is easier to meet the plastic yield criterion than the inner wall. The spinning loads in all directions exhibit a decreasing trend with the increase in the spinning temperature, and the spinning load in the axial direction is far less than that in the radial and tangential directions.

参考文献/References:

[1]OTSUKA K, REN Xiaobing. Recent development in the research of shape memory alloys[J]. Intermetallics, 1999, 7(5): 511-528.
[2]NIINOMI M. Recent research and development in titanium alloys for biomedical applications and healthcare goods[J]. Science and Technology of Advanced Materials, 2003, 4(5): 445-454.
[3]赵连城, 蔡伟, 郑玉峰.合金的形状记忆效应与超弹性[M]. 北京: 国防工业出版社, 2002: 1-30.
[4]PELTON A R, SCHROEDER V, MITCHELL M R, et al. Fatigue and durability of Nitinol stents[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2008, 1(2): 153-164.
[5]KURIBAYASHI K, TSUCHIYA K, YOU Zhong, et al. Self?蛳deployable origami stent grafts as a biomedical application of Ni?蛳rich TiNi shape memory alloy foil[J]. Materials Science and Engineering A, 2006, 419(1/2): 131-137.
[6]李茂盛, 张士宏, 康达昌, 等. 滚珠旋压工艺的滚珠直径选择 [J]. 材料科学与工艺, 2005, 13(6): 594-597.
[7]王忠堂, 王淼, 王本贤, 等. 滚珠旋压工艺参数对薄壁筒形件旋压变形的影响[J]. 热加工工艺, 2007, 36(1): 47-49. [8]JIANG Shuyong, REN Zhengyi, LI Chunfeng, et al. Role of ball size in backward ball spinning of thin-walled tubular part with longitudinal inner ribs[J]. Journal of Materials Processing Technology, 2009, 209(4): 2167-2174. [9]张艳秋, 江树勇, 孙金凤, 等. 薄壁筒形件多道次滚珠旋压成形机理研究[J]. 锻压技术, 2010, 35(2): 55-58.
[10]于振涛, 周廉, 皇甫强, 等. 介入用钛合金毛细管材料的研制、开发与应用[J]. 中国医疗器械信息, 2006, 12(12): 15-20.
[11]胡捷, 刘力. 钛镍形状记忆合金毛细管加工工艺研究[J]. 新技术新工艺, 2006, 6: 51-52.
[12]江树勇, 郑玉峰, 张艳秋, 等. 生物医用镍钛记忆合金管材塑性成形研究进展[J]. 锻压技术, 2009, 34(3): 1-5. [13]江树勇, 张艳秋, 赵立红, 等. 基于不同减薄量的纵向内筋薄壁筒反向滚珠旋压分析[J]. 应用科技, 2012, 39(6): 1-6.
[14]陆鹏,赵亚楠,张艳秋, 等. 基于不同减薄量的镍钛合金管热旋压成形分析[J]. 应用科技, 2013, 40(1): 1-8.

相似文献/References:

[1]陆鹏,赵亚楠,张艳秋,等.基于不同减薄量的镍钛合金管热旋压成形分析[J].应用科技,2013,40(01):1.[doi:10.3969/j.issn.1009-671X.201301015]
 LU Peng,ZHAO Yanan,ZHANG Yanqiu,et al.Deformation analysis of hot spinning of NiTi alloy tube based on different wall thickness reduction[J].yykj,2013,40(04):1.[doi:10.3969/j.issn.1009-671X.201301015]
[2]陆鹏,赵亚楠,张艳秋,等.镍钛形状记忆合金管材的研究进展[J].应用科技,2013,40(03):67.[doi:10.3969/j.issn.1009-671X.201302001]
 LU Peng,ZHAO Yanan,ZHANG Yanqiu,et al.Recent research of nickel-titanium shape memory alloy tube[J].yykj,2013,40(04):67.[doi:10.3969/j.issn.1009-671X.201302001]
[3]赵亚楠,江树勇,张艳秋,等.NiTi形状记忆合金的热变形行为及热加工图[J].应用科技,2017,44(01):76.[doi:10.11991/yykj.201605014]
 ZHAO Yanan,JIANG Shuyong,ZHANG Yanqiu,et al.Hot deformation behavior and processing map of NiTi shape memory alloy[J].yykj,2017,44(04):76.[doi:10.11991/yykj.201605014]

备注/Memo

备注/Memo:
收稿日期:2013-02-20.     网络出版日期:2013-07-03.
基金项目:国家自然科学基金资助项目(51071056).
作者简介:陆鹏(1972-),男,高级工程师,硕士,主要研究方向:飞机制造工艺;Email: lupeng72@sina.com.
更新日期/Last Update: 2013-10-11