[1]张海琛,佟丽莉,王丽君,等.非粘结柔性立管轴对称载荷作用下的理论模型分析[J].应用科技,2020,47(3):11-16.[doi:10.11991/yykj.201911025]
 ZHANG Haichen,TONG Lili,WANG Lijun,et al.Theoretical model analysis of unbonded flexible riser under axisymmetric load[J].Applied science and technology,2020,47(3):11-16.[doi:10.11991/yykj.201911025]
点击复制

非粘结柔性立管轴对称载荷作用下的理论模型分析(/HTML)
分享到:

《应用科技》[ISSN:1009-671X/CN:23-1191/U]

卷:
第47卷
期数:
2020年3期
页码:
11-16
栏目:
船舶与海洋工程
出版日期:
2020-07-05

文章信息/Info

Title:
Theoretical model analysis of unbonded flexible riser under axisymmetric load
作者:
张海琛 佟丽莉 王丽君 沈羿充 刘浩
哈尔滨工程大学 航天与建筑工程学院,黑龙江 哈尔滨 150001
Author(s):
ZHANG Haichen TONG Lili WANG Lijun SHEN Yichong LIU Hao
College of Aerospace and Civil Engineering, Harbin Engineering University, Harbin 150001, China
关键词:
非粘结柔性立管最小势能原理刚度矩阵层间接触理论模型数值模型罚参数轴向拉力扭矩
Keywords:
unbonded flexible riserprinciple of minimum potential energystiffness matrixinterlayer contacttheoretical modelnumerical modelpenalty parameteraxial tensiontorque
分类号:
TE53
DOI:
10.11991/yykj.201911025
文献标志码:
A
摘要:
非粘结柔性立管结构复杂,建立一个高效的力学模型非常关键。本文基于最小势能原理,建立了柔性立管在轴对称荷载作用下的刚度矩阵,通过罚函数方法得到表示层间法向接触关系的附加矩阵,将2个矩阵相加即得到柔性立管的整体刚度矩阵。利用此模型讨论了罚参数的取值,分析了柔性立管在拉伸和扭转荷载作用下的力学响应,并与数值模拟和实验结果进行了对比。研究表明:罚参数的取值越大,计算精度越高,但是取值过大会引起方程病态,结果不准确。该理论模型能够正确反映非粘结柔性立管在轴向拉力和扭矩作用下的力学特性,为工程设计的初始阶段提供了一定的参考依据。
Abstract:
The structure of unbonded flexible riser is complex, so it is very important to build a high-efficiency mechanical model. Based on the principle of minimum potential energy, the stiffness matrix of flexible riser under axisymmetric load is derived in this paper. By adding the additional function of normal contact between layers, the matrix of riser contact of is obtained, and the global stiffness matrix of flexible riser is obtained by adding the two matrices. Based on this model, the penalty parameters are discussed, and the mechanical responses of flexible risers under tensile and torsional loads are analyzed and compared with numerical simulation and experimental results. The results show that the larger the penalty parameter, the higher the calculation accuracy; but if the penalty parameter is too high, the equation will be ill conditioned and the result will be inaccurate; the theoretical model can correctly reflect the mechanical characteristics of the unbonded flexible riser under the axial tension and torque, which provides a certain reference for the initial stage of engineering design.

参考文献/References:

[1] TAN Z, CASE M, SHELDRAKE T. Higher order effects on bending of helical armor wire inside an unbonded flexible pipe[C]//ASME 2005 24th International Conference on Offshore Mechanics and Arctic Engineering. Halkidiki, Greece, 2005.
[2] KEBADZE E. Theoretical modelling of unbonded flexible pipe cross-sections[D]. London: South Bank University, 2000.
[3] FELIPPA C A, CHUNG J S. Nonlinear static analysis of deep ocean mining pipe-Part I: modeling and formulation[J]. Journal of energy resources technology, 1981, 103(1): 11-15.
[4] CHUNG J S, FELIPPA C A. Nonlinear static analysis of deep ocean mining pipe-Part II: numerical studies[J]. Journal of energy resources technology, 1981, 103(1): 16-25.
[5] WITZ J A, TAN Z. On the flexural structural behaviour of flexible pipes, umbilicals and marine cables[J]. Marine structures, 1992, 5(2/3): 229-249.
[6] WITZ J A, TAN Z. Rotary bending of marine cables and umbilicals[J]. Engineering structures, 1995, 17(4): 267-275.
[7] 任少飞, 唐文勇, 薛鸿祥. 轴压下非黏结柔性立管响应特性的数值计算方法[J]. 上海交通大学学报, 2014, 48(4): 565-569, 582
[8] 任少飞. 非粘结柔性立管截面力学性能及典型失效特性研究[D]. 上海: 上海交通大学, 2015.
[9] 陆钰天. 深水柔性立管截面力学模型与疲劳寿命分析研究[D]. 杭州: 浙江大学, 2017.
[10] 陈耕. 海洋非粘结柔性管线的横截面力学性能分析[D]. 哈尔滨: 哈尔滨工程大学, 2011.
[11] YOO D H, JANG B S, YIM K H. Nonlinear finite element analysis of failure modes and ultimate strength of flexible pipes[J]. Marine structures, 2017, 54: 50-72.
[12] 董磊磊, 张崎, 黄一. 基于能量法的非黏合柔性立管轴对称响应分析[J]. 华中科技大学学报(自然科学版), 2013, 41(5): 122-126
[13] 郭有松, 陈希恰, 王德禹, 等. 非黏结柔性立管轴对称载荷作用下的结构响应和数值分析[J]. 石油学报, 2015, 36(4): 504-510, 515
[14] 陈希恰. 深海柔性立管结构力学特性分析[D]. 上海: 上海交通大学, 2014.
[15] 裴晓梅, 张恩勇, 李丽玮, 等. 非粘接柔性立管抗拉和抗扭刚度计算分析方法对比[J]. 海洋工程装备与技术, 2017, 4(5): 307-314
[16] DE SOUSA J R M, MAGLUTA C, ROITMAN N, et al. A study on the response of a flexible pipe to combined axisymmetric loads[C]//ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. Nantes, France, 2013.
[17] 富倡. 基于边界元法的三维弹性摩擦接触系统罚函数法的建模与优化[D]. 秦皇岛: 燕山大学, 2017.
[18] 姜豪, 杨和振, 刘昊. 深海非粘结柔性立管简化模型数值分析及实验研究[J]. 中国舰船研究, 2013, 8(1): 64-72

备注/Memo

备注/Memo:
收稿日期:2019-11-26。
基金项目:国家自然科学基金青年科学基金项目(51409065)
作者简介:张海琛,男,硕士研究生;佟丽莉,女,研究员,博士
通讯作者:佟丽莉,E-mail:tonglili@hrbeu.edu.cn
更新日期/Last Update: 2020-08-05